| |
|
|
|
| |
-
Remove the screw eye with the tassel attached from the
pole.
-
Place the ornament on the pole aligning the hole in
the ornament with the drilled out hole in the pole.
- Insert the screw eye through the hole in the ornament
and into the pole where the hole is drilled out. Gently
tighten to secure ornament to pole.
- Screw the top and bottom sections of the pole together.
CAUTION: Be careful not to over-tighten or cross thread.
- Insert the bottom of the pole into the floor stand.
If the pole does not go into the stand easily, check and
make sure the reducer insert has been removed from the
floor stand.
|
 |
| |
| |
| Top |
|
|
| |
|
|
|